Additional services
in addition to our procedures, we offer many other services. These include: 100% controls extended workbench (assembly service) determination of residual dirt salt spray test / corrosion test training and Workshops …
Adhesion Promotion
We can offer a process that promotes bonding characteristics from rubber-metal combinations. Depending on the base materials (steel, aluminum or plastics) we can process silane, phosphate and Cr (VI) -free conversion …
Anodizing / Hard Anodizing
E coat anodizing generates an aluminum ceramic layer, through an electrolytic oxidation process. In comparison with the base material, the wear resistance increases tremendously. The process is also named as anodization. …
Cathodic Dip Coating (e-coat)
Coating layers that are built through the cathodic dip painting process, have one of the best corrosion protection characteristics in the metal coating industry. They also have a uniform layer structure. We have coated …
Chemical paint stripping
When painting components, it can happen that the painted surface does not meet the required quality standards. Then, as a rule, the only thing that helps is stripping. There are basically 3 different options for …
Chromium VI-free aftertreatment
In the case of chromium (VI) -free post-treatment, conversion layers are produced on freshly deposited zinc or zinc alloy coatings by treatment with a passivation. The freshly deposited coating reacts with the …
Degreasing / Etching / Washing
We clean and activate metallic surfaces as a pretreatment for subsequent downstream processes such as gluing, bonding or welding. We use this developed material-specific method especially for light metals. Through …
Impregnation
Even with careful casting techniques, some castings can have some porosity, which makes parts for the intended application unusable. Through our modern methods of impregnation, it is possible to seal cracks and …
Inside Rinsing of coolers
The internal rinsing of the cooler forms the background for the conductivity rinsing in fuel cell applications. The requirements of the OEMs for the conductivity in the cooling circuit are usually between 5 and 100 µS / …
Painting
The technical paints are applied in a spray process, whereby we use both our own and customer-specified paints. We paint on a wide variety of base materials and can choose from a large number of suitable pre-treatment …
Passivation
Through the Conversion / Passivation coating, metals are covered with a non-metallic, Cr (VI) -free protective layer. In the HEICHEGROUP a variety of metal surfaces such as aluminum, magnesium, zinc die casting or steel …
Phosphating
Phosphating, depending on the crystal structure, is very suitable as a primer for subsequent coatings. It improves drawing, sliding properties and also guarantees a temporary corrosion protection, especially in …
Powder Coating
Powder coatings are ideal for mechanically highly stressed parts due to their excellent stone chip and scratch resistance. Typical base materials are steel, aluminum, zinc die casting and cast iron. With a thickness …
Sealer / topcoats
When sealing, we create a thin organic or inorganic protective layer about 0.5-2 μm thick on zinc or zinc alloy coatings. Sealing is generally carried out on passivated surfaces, with the sealing penetrating the …
Sol-Gel-Coating (Nano Technology)
Sol-gel and Nano coating layers are applied to specific pre-treated metal surfaces by a dipping or spraying procedure. Although the layer thickness is thin, the corrosion resistance is excellent. Also the Nano Coating …
Zinc alcaline / acid
As a process for the refinement of surfaces, galvanizing is proven and versatile. It is the most widely used and most cost-effective method for achieving reliable corrosion protection for numerous areas of application. …
Zinc-Nickel alcaline & acid
The galvanically deposited zinc-nickel alloy meets the extremely high corrosion requirements of the automotive industry. This process is reliably commissioned in the most modern, fully automated systems. Zinc-nickle acid …
KAP Surface Technologies Extra Services
In addition to our processes, we offer many other services. This includes the additional services at the KAP Surface Technologies locations. …