find the right process
Additional services
in addition to our procedures, we offer many other services. These include: 100% controls extended workbench (assembly service) determination of residual dirt …
Adhesion Promotion
We can offer a process that promotes bonding characteristics from rubber-metal combinations. Depending on the base materials (steel, aluminum or plastics) we …
Anodizing / Hard Anodizing
E coat anodizing generates an aluminum ceramic layer, through an electrolytic oxidation process. In comparison with the base material, the wear resistance …
Cathodic Dip Coating (e-coat)
Coating layers that are built through the cathodic dip painting process, have one of the best corrosion protection characteristics in the metal coating …
Chemical paint stripping
When painting components, it can happen that the painted surface does not meet the required quality standards. Then, as a rule, the only thing that helps is …
Chromium VI-free aftertreatment
In the case of chromium (VI) -free post-treatment, conversion layers are produced on freshly deposited zinc or zinc alloy coatings by treatment with a …
Degreasing / Etching / Washing
We clean and activate metallic surfaces as a pretreatment for subsequent downstream processes such as gluing, bonding or welding. We use this developed …
Impregnation
Even with careful casting techniques, some castings can have some porosity, which makes parts for the intended application unusable. Through our modern methods …
Inside Rinsing of coolers
The internal rinsing of the cooler forms the background for the conductivity rinsing in fuel cell applications. The requirements of the OEMs for the …
Painting
The technical paints are applied in a spray process, whereby we use both our own and customer-specified paints. We paint on a wide variety of base materials and …
Passivation
Through the Conversion / Passivation coating, metals are covered with a non-metallic, Cr (VI) -free protective layer. In the HEICHEGROUP a variety of metal …
Phosphating
Phosphating, depending on the crystal structure, is very suitable as a primer for subsequent coatings. It improves drawing, sliding properties and also …
Powder Coating
Powder coatings are ideal for mechanically highly stressed parts due to their excellent stone chip and scratch resistance. Typical base materials are steel, …
Sealer / topcoats
When sealing, we create a thin organic or inorganic protective layer about 0.5-2 μm thick on zinc or zinc alloy coatings. Sealing is generally carried out on …
Sol-Gel-Coating (Nano Technology)
Sol-gel and Nano coating layers are applied to specific pre-treated metal surfaces by a dipping or spraying procedure. Although the layer thickness is thin, the …
Zinc alcaline / acid
As a process for the refinement of surfaces, galvanizing is proven and versatile. It is the most widely used and most cost-effective method for achieving …
Zinc-Nickel alcaline & acid
The galvanically deposited zinc-nickel alloy meets the extremely high corrosion requirements of the automotive industry. This process is reliably commissioned …
KAP Surface Technologies Extra Services
In addition to our processes, we offer many other services. This includes the additional services at the KAP Surface Technologies locations. …
